NETGEAR WGR614L Open Source Wireless-G Router (Compatible with Linux)NETGEAR WGR614L Open Source Wireless-G Router (Compatible with Linux)
Enlarge View
This offer is no longer available. Visit our home page to discover our latest discount offers.
- Open source 802.11G router allows Linux users and developers create custom firmware for special applications
- Switch with four 10/100 Mbps auto-sensing ports; external antenna and internal diversity antenna for maximum range
- Features 240 MHz CPU, 4 MB flash and 16MB RAM and runs the Linux operating system
- Supported by open source community website with forums, blogs and downloads
- Measures 6.9 x 1.1 x 4.7 inches (WxHxD); 1-year warranty
|
 A Gigabit Ethernet connection means fast speeds when the ReadyNAS is connected to your home network. View larger. |
The WGR614L functions as a 802.11g wireless access point, supports speeds up to 54 Mbps, is backwards compatible with 802.11b networks, and is auto-rate capable. The router has both an external antenna and an internal diversity antenna for maximum wireless range and performance. The router also boasts wired connectivity with four 10/100 Mbps (auto-sensing) Ethernet ports.
Both static and dynamic routing with TCP/IP is supported, as is VPN pass-through (IPsec, L2TP), NAT, PPTP, PPPoE, DHCP (client and server).
Security You Can Depend On
A Stateful Packet Inspection (SPI) firewall protects your network against Denial of Service (DoS) attacks, and the wireless access point supports WPA-PSK and WPA2-PSK encryption, as well as 40/64-bit and 128-bit WEP encryption.
Open Source for Customization
Just because it's Linux doesn't mean it's difficult. The router works with most Internet gaming and instant messaging applications, and automatically detects ISP type, has exposed host (DMZ), MAC address authentication, URL content filtering, and logs and email alerts of internet activity. ADD MORE
The WGR614L features a 240 MHz CPU, 4 MB flash and 16 MB RAM, and runs the Linux operating system. Users can customize and modify the router to achieve special functionality and optimizations, as well as create custom software applications.
The router comes with a comprehensive open-source user guide, and for additional development support you, the router has its own active open source Web community (myopenrouter.com), featuring user forums, downloads, and blogs.
Windows Compatibility
Sometimes you have to boot into Windows, and the WGR614L has you covered there as well. The router features both WPA and WPA2 standards, and is "Works with Windows Vista" certified.
The router measures 6.9 x 1.1 x 4.7 inches (WxHxD) and weighs a little more than half a pound. It is backed by a 1-year warranty.
What's in the Box
WGR614L Open Source Wireless-G Router, setup CD, power adapter, ethernet cable, vertical stand, warranty/support information card.
- Personal Computers: 0 pages
- Platforms: Windows
- Publisher: Netgear
- Label: Netgear
- Format: CD
- Studio: Netgear
- Sales Rank in Electronics: #52812
|
13 of 15 people found the following review helpful:  Well Performing Device & Installation is a Snap, By This review is from: NETGEAR WGR614L Open Source Wireless-G Router (Compatible with Linux) (Personal Computers) Customer review from the Amazon Vine™ Program (What's this?) What does the "Open Source" in the name mean? Do you need to be a "techie"? Nope. It means the firmware is "open source" instead of proprietary code normally used in devices like this. There is no perceivable difference from a normal user's point of view. If you ARE a techie, it could open a lot of doors for customization. Assuming you have just a bit of experience, installation is a snap. The manufacturer recommends first hooking it up via a cable to a standard Ethernet port in order to configure it then go wireless. I didn't with no problems (I went wireless from the get go). The only time for the cable is if you upgrade the firmware. This is standard on all routers I have ever used. If you are a bit unfamiliar with this type of device, they include very simple-to-use software to both install and configure. The included CD also has the user manual on it. Configuration: I have to say that the web interface is the nicest I have seen. The help for...Read more 3 of 3 people found the following review helpful: Pretty Decent Router That's Easy to Set Up, By This review is from: NETGEAR WGR614L Open Source Wireless-G Router (Compatible with Linux) (Personal Computers) Customer review from the Amazon Vine™ Program (What's this?) I've dealt with several different types of wireless routers, so I wasn't expecting a lot of problems with this Netgear router. Fortunately, I was not disappointed. The set-up and configuration was a snap, and I had wireless internet ready to go in just a couple of minutes. The installation is probably simple enough for most people to quickly figure out, but even if you are new to routers, this Netgear router comes with a quick start guide that should help you out.
I have a Linksys router in use at my home which occasionally goes out and needs to be reset, but so far I have not had any problems with the signal going out on this Netgear router. Also, the range is pretty decent. The router comes with an installation disc, but I haven't actually ever needed to use it (using Windows XP). The only issue I can complain about is the configuration set-up screen. When I make changes in the configuration screen over the wifi network, sometimes the router disconnects...Read more 5 of 6 people found the following review helpful: "g" rated, By This review is from: NETGEAR WGR614L Open Source Wireless-G Router (Compatible with Linux) (Personal Computers) Customer review from the Amazon Vine™ Program (What's this?) This wireless -g router appears to be adequate for basic wireless connectivity. If the planned installation is limited to less demanding transmissions in a modest broadcast range, the WGR614L appears to deliver. I got this unit since I have some interest in exploring Linux but it was immediately evident I would have to make some unpalatable major compromises in order to use it in my present setup. Since I already operate under `N' standards, I had hoped to use this unit as a repeater for a specific laptop with Linux operating system, however, that would require a reduction in overall network security to WEP and I am not willing to make that adjustment since there are a number of other wireless installations visible to me in my local area. While I do not broadcast my SSID now, I do not believe reverting to a lesser security standard is worth it. As a standalone, it will support WPA2 encryption and WPS connectivity. Up to four devices and be connected via Ethernet.
It...Read more |
